Replacement A5 Skip Tooth Cutter (Ceramic)

Designed for heavier and matted coats, the VUNRO Replacement A5 Skip Tooth Cutter in ceramic brings your skip tooth blades back to a keen, pre sharpened edge. This cool running ceramic dog clipper cutter slides in fast, so you power through bulk and thick hair without any sharpening downtime.

• Skip tooth ceramic cutter bites through dense, matted and heavy coats
• Pre sharpened edge performs at full sharpness from the first pass
• Cool running ceramic stays comfortable during demanding rough outs
• Instant slide in swap ends the wait and cost of sharpening
• Reliable edge every fit keeps your bulk removal consistent

Compatible with VUNRO A5 Skip Tooth blades. Do not use with standard A5 blades. Keep one in your kit and your skip tooth blades are always ready to work.

• Start with a thoroughly brushed, clean and completely dry coat.
• Use gentle, consistent pressure, keeping the cutting edge parallel to the skin.
• Keep strokes smooth and steady; do not rush or press harder if the blade pulls.
• Clip with the natural direction of growth for an even trim. Clipping against growth produces a closer finish.
• Use appropriate scissors for precision detailing after clipping, especially with longer lengths.
• Check blade temperature frequently and allow cooling breaks for your pet's comfort.

Switch off and unplug the clipper before removing the blade. Keep the cutter aligned and follow the fitting demonstration. If you are unsure, stop and ask VUNRO for help.

VUNRO skip-tooth A5 blades only. Select the matching number; standard finishing cutters do not fit.

Standard A5, #40/#50, wide A5, skip-tooth A5 and D-Series cutters are not all interchangeable. A cutter does not change the cutting length of the fixed blade it is fitted to.

Send us your blade details if you would like us to check the match.

No. This product is the replacement moving cutter for your Skip-tooth A5 blade assembly, not a complete blade or clipper. Match the option to the blade you already own.

VUNRO skip-tooth A5 blades only. Select the matching number; standard finishing cutters do not fit.

Check the number and system marked on your existing blade, then choose the matching option above. A replacement cutter does not change the cutting length of the fixed blade. If you are unsure, send VUNRO your blade details before ordering.

This Ceramic replacement cutter provides a hard, sharp moving edge for the matching Skip-tooth A5 blade. Ceramic resists corrosion, but its teeth still need careful handling: avoid drops and impacts, and replace a cutter with chipped or damaged teeth. Keep the complete blade assembly clean and lubricated, and continue checking its temperature during use.

The cutter is supplied pre-sharpened. Switch off and unplug the clipper, remove the blade and follow the fitting demonstration for Skip-tooth A5. Check alignment before use. If you are unsure about fitting or tension, stop and ask VUNRO or a blade-service specialist for help.

With the clipper switched off and unplugged, brush away hair and debris after use. Clean and lubricate the blade assembly according to its care instructions, then dry it before storage. Check blade temperature during grooming and allow cooling breaks when needed.

Replace it if a tooth is chipped, cracked or broken. If cutting deteriorates after cleaning and correct lubrication, have the complete blade assembly checked: the fixed blade, alignment or tension may also need attention. Ask a specialist who works with ceramic cutters before attempting to restore the edge.

Inspect the teeth for damage and check that the cutter is correctly aligned and securely fitted. Do not use a blade with bent, chipped or broken teeth. If the blade is loose, binds or pulls, stop and have it checked rather than applying more pressure.

Store it clean and dry in a protective case or its packaging, with the teeth protected from knocks. Keep it away from moisture and loose metal tools. Follow the blade assembly's lubrication instructions before storage.

Securely contain the sharp edges so they cannot injure anyone; do not leave the cutter loose in a bin. Ask your local waste service how to dispose of sharp ceramic parts safely.

Not sure about the cutter, blade number or fitting? Contact VUNRO before ordering. For help planning a grooming kit, try the Grooming Adviser.